Self-leveling floors – solid, reliable, wear-resistant coating, widely used in both industrial buildings and in indoor public facilities. It has many advantages, among which the solidity (No seams), moisture resistance, impact resistance, resistance to temperature changes. Simplicity and ease of cleaning liquid floor allows their use in rooms facing higher hygiene Requirements: in hospitals, dispensaries, beauty salons, etc. The rich colors of the composition and use of color chips can create not only functional, but beautiful and exclusive coverage. However, in order to floor fillers served long and pleasing to the eye to its attractive appearance, you must comply strictly with the technology of their placement. Work on the device filling the floor divided into several stages. Preparation founding of the first stage is to prepare the base, which can be virtually any: concrete floor, cement and sand screed, anhydrite or magnesite, tiles, wooden floor.
In each case, require their work in preparation – surface degreasing, stripping, sanding, priming. Most often the device self-leveling floor is carried out on the concrete base, so the main attention will be devoted to him. Requirements for the concrete base to concrete foundation presented a number of requirements. Its compressive strength must be at least 20 MPa, tensile strength – not less than 1,5 MPa. Humidity of the concrete base must be no more than 4% or you may be separation of the polymer. In the case where the base lies on the ground, the device must be high quality waterproofing. When carrying out a very important temperature-humidity regime.